Breathe Divinity Repairs That Usually Work
Seams, cuffs and hems are the straightforward ones. A seam that has opened, a cuff that has lost its stretch at one point, a hem that has come down on one side — all of those are ordinary repairs and none of them affect the print.
What Usually Cannot
A print that has cracked across a fold, or lifted after a turn in the dryer, cannot be put back. Ink does not go down twice, and a patch over a graphic looks worse than the crack ever did. That is the whole reason the care page is worth two minutes of anyone's time.
Fault or Wear
There is a real difference between the two and we will say which one we think it is. A seam that gives way early is ours. A print that has faded over several hot washes is wear, and pretending otherwise would not help you choose the next piece any better.
Keeping a Print Alive Before It Needs Mending
Almost every unfixable piece that reaches us failed in the same way, and it was heat rather than wear that did it. A tumble dryer softens the ink, the garment tumbles against itself, and the drawing cracks along whatever fold it was lying in. Once that has happened there is nothing to repair, because ink cannot be laid over a broken print and matched.
The habits that prevent it are dull and they work. Cold water, garment turned inside out so the print faces away from the drum, and air drying on a hanger rather than folded over a rail. An iron goes nowhere near the drawing; if a crease needs dealing with, press the fabric around it from the reverse.
On Heavier Pieces
A 380 GSM hoodie holds a lot of water and will stretch at the shoulders if you hang it wet on a thin hanger. Dry it flat first, then hang it. Everything else is on the. care page.